WHOOP 4.0 Battery Pack and Sensor LEDs

Check how much power your WHOOP 4.0 or battery pack has remaining so you can stay charged wherever your day takes you. Both the WHOOP 4.0 sensor and the 4.0 battery pack make use of LEDs in order to seamlessly and intuitively display the current charge level remaining. See below for a breakdown.

 

IN THIS ARTICLE


WHOOP 4.0 Sensor LEDs

Double-tap the top of your WHOOP 4.0 sensor and an LED on the side will briefly illuminate. Based on its color, you can quickly tell how charged your 4.0 is:

  • Green = 50-100%
  • Yellow = 20-49% 
  • Red = 5-19% 
  • Blinking red = less than 5%

Note: If no LEDs illuminate on either side of your WHOOP 4.0 when double-tapping, your 4.0 could have drained to 0%. Open up the WHOOP app and check if your 4.0 has disconnected - you may need to charge. 

 

4.0 Battery Pack LEDs

A fully-charged battery pack has the capacity to charge a 4.0 a single time - for more details on the 4.0 battery pack abilities, check out our 4.0 Battery Pack Overview article. 

When plugged in to charge, the LED on your battery pack will remain continuously illuminated. When it's not charging, double-tap the top of your 4.0 battery pack at any time to see its current charge level. Based on its color, you can quickly tell if your battery pack is ready to charge your 4.0.

  • Solid green = 70-100%
  • Solid red = 1-69%

 

Last updated October 8, 2021

 

Was this article helpful?
2 out of 2 found this helpful

Comments

0 comments

Article is closed for comments.